Huawei stopped production less than 1 month, and Flextronics Changsha factory stopped production! The second phase of the project was taken over by BYD.

July 12 news, according to Caixin. Com, "Since March 20 19, Flextronics Changsha Phase I project has encountered difficulties in production. In May 20 19, Flextronics Changsha factory stopped production. " The main reason for the suspension of Flextronics Changsha factory is the "US ban on Huawei", because the main production capacity of Flextronics Changsha factory is to give Huawei mobile phones.

According to the data, Flextronics 1969 was founded in Silicon Valley, and 1987 entered China. It is the second largest electronic product OEM in the world after Foxconn. At present, Flextronics has more than 65,438+000 factories and 200,000 employees in more than 30 countries. At present, there are factories in Zhuhai, Shenzhen, Suzhou and Changsha. Flextronics Changsha factory has just completed 20 18.

According to the industrial and commercial registration data, Flextronics Technology (Changsha) Co., Ltd. was established on 20 18 12 10, with a registered capital of100,000 USD, and Flextronics Asia Investment Co., Ltd. holds 100%.

According to reports, Flextronics Changsha Intelligent Manufacturing Industrial Park is an intelligent manufacturing production base jointly built by Huawei according to the Industry 4.0 standard. With a total investment of 5 billion yuan, the project will mainly build mobile phone smart terminals, smart terminal power supplies, networks and consumer electronics production bases.

According to the local media in Changsha, Sanxiang Metropolis Daily, the project will be built in three phases, with a planned production capacity of 65.438+0.5 billion smart terminals and more than 30,000 new employees.

From April, 20 18 to April, 20 17, the first phase of the project was officially started, which took only 86 days. On July 20 18, the first phase of Flextronics project in Wangcheng Economic and Technological Development Zone was officially put into production. According to Xinzhixun, Flextronics Changsha Phase I Factory has 16 SMT production lines, 23 assembly lines have been officially put into production, with about 5,000 employees, and the average daily production capacity of mobile phones is about 60,000, with a peak of 80,000.

The second phase of the project also started construction in June 20 18, and was officially delivered to Flextronics on April 30 this year. According to the internal staff of the Management Committee of Wangcheng Economic Development Zone, "the second phase of the project has been basically completed, and only the remaining projects such as the renovation of staff quarters need to be completed".

The Flextronics project in Changsha was going well. However, since the United States announced its "ban" on Huawei on May 16, 2006, Flextronics suspended its cooperation with Huawei because it had to abide by the US ban. Flextronics Changsha project was originally built to cooperate with Huawei's mobile phone production. As a result, the first phase of the Flextronics project in Changsha stopped production, and the second and third phases were inevitable.

At the end of May, Flextronics Changsha employees posted in Baidu Post Bar that the workload in the factory was much less and there was no overtime work on weekends, and "it didn't get better until June, so it can be said that Flextronics Changsha project was completely finished". From this point of view, Flextronics factory in Changsha should stop production in mid-June. ?

Prior to this, around May 20 this year, it was also reported in the industry that Flextronics factory in Zhuhai stopped OEM for Huawei mobile phones, and the HW (Huawei) project department of PCBA South Factory campus in Zhuhai was also put on a long vacation.

In addition, before the release of Xinzhixun, "Flextronics stopped OEM for Huawei! How big is the loss? In the comments of netizens, some employees who claimed to be Flextronics Ganzhou factory said, "The HW order of our Ganzhou factory is gone, and the employees are on holiday. They left and left. It was really influential. Huawei is very awesome. "

Obviously, the suspension of cooperation with Huawei has a great impact on Flextronics factories in Zhuhai and Ganzhou, and the Flextronics Changsha project, which was specially built for Huawei's mobile phone service, can't escape the fate of production suspension.

According to Caixin. BYD has taken over Flextronics Phase II project and started to recruit employees. According to the industrial and commercial data, on June 1 1 day, 2065438, Changsha BYD Electronics Co., Ltd. was incorporated, and its registered place was the location of Flextronics Phase II, namely No.9 Tengfei Road, Wangcheng Economic Development Zone, Changsha City. After Flextronics stopped cooperating with Huawei, BYD, as one of the main contract manufacturers of Huawei mobile phones, also benefited directly.

▲ Flextronics Phase II Project (the back open space is reserved for Phase III Project)

However, there is no conclusion as to where the first phase of Changsha Flextronics project will go. Although the first phase of the project has been discontinued, Flextronics employees are still maintaining basic operation. Caixin.com said that Lance Technology has expressed its willingness to take over Flextronics Phase I to government departments.

However, it should be pointed out that the US Department of Commerce recently confirmed that it will fulfill the promise made by US President Trump and will allow American companies to provide Huawei with products and services that will not "endanger US national security". Relatively speaking, the mobile phone OEM business is a low-level service, but the US government may issue a license to Flextronics to allow it to continue to provide mobile phone OEM services for Huawei. This also brought a glimmer of light for Flextronics Changsha Phase I project.

But the question is, even if the US government allows Flextronics to continue to cooperate with Huawei, is Huawei willing to continue its in-depth cooperation with Flextronics as before?