How long does it take a novice to learn to debug the spring machine?

For beginners, learning to debug the spring machine is a "step by step" process, in which the accumulation of operation skills is very important, but the concept of time varies from person to person. Manager Li, who started the spring machine, reminds me: ① Beginners learn to debug the computer spring machine. It is suggested that novices learn the 08 spring press (KCT-8CCNC computer spring press). The first thing novices should know and master is: (1) model structure and principle; (2) Installation and grinding of tools; ⑶ Computer system operation and application; (4) actual operation and accumulation. Beginners can start with simple compression spring products and gradually master the outer diameter control, length control, pitch control, diameter change control and notch shape control at both ends of compression spring (convergence and parallel). Generally speaking, it takes 2-4 days to study and debug 08 Spring Press. Want to achieve deeper attainments, need more practical operation and time accumulation.

② Beginners learn to debug the universal spring machine. Beginners are advised to start with model 20 spring machine (KCT-20BCNC computer spring machine). Beginners learn to debug universal spring machine, besides mastering the basic content, the most important thing is to master the angular position of crank arm determined by cam plate. The cam of the computer spring machine runs 360 degrees repeatedly, and the working state of the crank arm is determined by the position of the cam plate, which can complete the basic structural elements such as circle, arc, straight line and folding angle. Generally speaking, it takes 3-5 days to learn and debug the 20-type spring machine. You can achieve higher attainments through the later practical operation and time accumulation.

③ Beginners learn to debug the cam-less spring machine. In recent years, the cam-less spring machine has been recognized and widely used in China. Its characteristics are as follows: (1) Unique design without cam and rocker, the technical master no longer arranges the angular position of the cam plate during debugging, only needs to be familiar with the computer operating system and corresponding programming, which greatly reduces the debugging difficulty of the machine; ⑵ The arm can be dismounted and installed, that is, the arm can be dismounted at any position on the panel according to the needs of product molding, and the running track of the spring can be staggered during specific operation, thus avoiding the phenomenon of knife collision. In addition, due to the detachable mounting of the arm, the internal space is large, which provides more powerful functions for various complex spring forming; ⑶ Independent servo drives each arm, which can run independently, and the travel trajectory can be set freely as required, which can effectively avoid invalid actions, shorten the time interval and improve work efficiency. Generally speaking, it takes 2-5 days to learn and debug "Pioneer" cam-less spring machine.

In a word, it is very expensive for beginners to learn to debug the spring machine, because it is impossible to do it overnight. As the saying goes, "the master leads the door, and learning art is in the individual." As for the level of operational skills achieved, it mainly depends on the individual's actual efforts and literacy. As far as the domestic spring and spring equipment industry is concerned, both spring factories and spring machine manufacturers are recruiting spring machine masters, and the salary is quite good.