Manual edge copy video

Manual edge copying method is as follows:

Manual double-thread wrapping is not as good as machine, and clothes can be taken off in seconds. Widely used/video/bv1TN 41107ad/? share_source=copy_web

1. Preparation tools: needle and thread, scissors and cloth.

2. Cutting cloth: according to the shape and size of the cloth to be wrapped, cut it with scissors.

3. Determine the starting point: find an edge point of the cloth as the starting point of the hem.

4, needle: needle knot.

5. Start sewing: from the starting point, thread the needle and thread through the cloth, and then tighten the thread on the other side of the cloth to align the edges of the cloth.

6, keep parallel: in the process of copying the edge, keep the direction of the line parallel to the edge of the cloth to avoid distortion or unevenness.

7. Gradually tighten: In the process of edge sewing, gradually tighten the thread so that the edges of the cloth are gradually aligned.

8. Finish hemming: When the end of hemming reaches, thread through the cloth, and then tighten the thread on the other side of the cloth to align with the edge of the last end.

9. Cut the thread end: cut the thread end with scissors to make the thread end neat.

10. Check the quality: check the quality of edge wrapping to ensure that the edge is neat and smooth, without deformation or unevenness.

Precautions for manual edge copying:

1, tool selection: choose appropriate needle and thread and scissors, needle and thread should be selected according to the thickness and texture of the cloth, and scissors should be sharp and undamaged.

2. Cloth treatment: Before wrapping, the cloth should be cleaned to avoid dust and impurities affecting the wrapping quality.

3. Needle and thread threading: Pay attention to the tightness of the thread when threading, so as not to be too tight or too loose to affect the smoothness and firmness of the copying edge.

4, keep parallel: in the process of copying the edge, keep the line parallel to the edge of the cloth to avoid distortion or unevenness.

5. Gradually tighten: In the process of hemming, gradually tighten the thread, so that the edges of the cloth are gradually aligned, so as to avoid the deformation of the cloth caused by being pulled too tightly at first.

6. End point treatment: When the end point of the seam edge reaches, the thread should pass through the cloth, and then tighten the thread on the other side of the cloth to align the edge of the last end to avoid abrupt or irregular thread ends.

7. Thread end treatment: When cutting the thread end, cut it from the middle of the thread end with scissors to avoid residual or uneven thread end.

8. Check the quality: After the edge wrapping is completed, carefully check the edge wrapping quality to ensure that the edge is neat and smooth without deformation or unevenness.

9. Safety precautions: When using tools such as scissors, pay attention to safety and avoid injury.