Work safety in production should be to avoid accidents as much as possible in the process of production activities, right?

Safety in production should be to avoid accidents as much as possible in the process of production activities, right? I think this is wrong.

First, not only in the process of production activities, safety work should run through the whole process, and safety work should be done well from preparation, start, process and end

The second is not to try to avoid, but to put an end to accidents.

I hope I can help you.

What can be done in safety production to avoid accidents? Safety production accident prevention and treatment system

1. Project leaders and safety inspectors at all levels shall conduct regular and irregular safety inspections. The inspection process should be strict and serious, as far as possible to find and eliminate potential safety hazards, so as to prevent problems before they happen.

2. Strictly implement the Regulations on the Reporting and Handling of Occupational Casualty Accidents in Enterprises promulgated by the State Council, and make timely, accurate and true investigation, handling and statistical reports of casualty accidents.

3, after the casualty accident, first rescue the wounded, at the same time protect the scene. In order to rescue the wounded and prevent the accident from expanding, it is necessary to mark, record and draw the scene map in detail when moving the objects on the scene.

4. After the accident of serious injury and above casualties, the relevant personnel on site shall immediately report to the competent department step by step.

What supervision should be given priority to in safety production? The basis of work safety is: effective work safety organization. Second, strict and feasible strict rules and regulations. Third, the inspection mechanism is in place. Four, serious and true inspection records as scheduled.

What should be paid attention to in the process of dispatching and directing production to avoid production safety accidents? In the safety production activities of enterprises, people usually call managers' requirements for employees' safety standards "I want to be safe" and employees' conscious safety behavior "I want to be safe".

The two formulations not only express different language concepts, but also have different security implementation methods and management effects. "Want me to be safe" is a guest.

What should safety production be based on? Work safety in production should be based on ().

A, active prevention B, safety inspection C, publicity and education D, accident investigation and handling

Answer: choose a.

Summary of substation safety production activities: June 2007, 5438+065438+ 10/5 to February 2007 15 is our company's safety production month. Focusing on the theme of "laying a solid foundation, improving quality, setting a benchmark and striving for first-class", * * Substation has carried out various concrete actions: through kanban. Through 48+4 learning opportunities, carry out a big discussion on safety in production; Inquire about the hidden dangers of this site through safety activities. It has formed a good atmosphere of "everyone learns safety and is responsible for ensuring safety at all levels", which has made our station's safety production work go to a new level.

The specific work of this site safety production month activity is as follows:

1. Carry out the publicity work of Safety Month activities, and everyone will sit together to discuss the theme of the activities, learn the implementation outline, and discuss the activities arrangement at each implementation stage. Deeply reflect on the 1 1.3 accident and learn from it. Everyone wrote a reflection on the 1 1.3 accident, and everyone on duty talked about their own views and suggestions on the safety management, record reports, rules and regulations, training work, accident hidden dangers and other aspects of this station, and put their greatest enthusiasm into the management of this station, which shows 65438.

2. Carry out in-depth safety inspection activities. On the basis of safety production rectification week, combined with autumn safety inspection, further investigate the hidden dangers of safety production in this station, especially the establishment, perfection, perfection and implementation of various rules and regulations, and comprehensively, specifically and pertinently revise the on-site implementation procedures; Formulate the anti-accident plan for power failure of the whole station, formulate anti-accident measures for low temperature weather and ice flash prevention, and conduct on-site drills. At present, it is in a sensitive period after the adjustment of customs clearance personnel at the end of the year, and the employees' thoughts fluctuate greatly. Moreover, this station is preparing for the operation of new buses and new sections. There are many construction workers, and their safety awareness and safety prevention skills are low, which is a major hidden danger in the recent safety implementation of our station. We will discuss the existing and potential dangers in the construction process with the person in charge of the work, and formulate targeted preventive measures to ensure the construction safety. In view of the uneven quality of personnel and different safety awareness, we have formulated the detailed assessment rules for * * Station, formulated measures, defined responsibilities and working procedures, and made full preparations for any possible situation.

3. Use the shift change time to inquire about the hidden dangers of this site, and implement subsection and slot, and the responsibility lies with people. We summarize and analyze the hidden dangers we find, and carefully eliminate those we can solve in time. Those that can't be solved due to the insufficient capacity of our station will be included in the occupational safety and health system of the work area, which will be responsible for the solution. The reported defects are reported, and the reported hazard identification is reported, so that all equipment, all work and all dangerous points in the station are in a controlled, controllable and controllable state.

4. For the work and operation carried out this month, we have made an accident plan, such as the preparation for replacing the 220KV bus differential protection and hanging paint. In addition to the arrangement and tracking of the work area, the station changed from three shifts to two shifts according to the new adjustment of personnel and the unfamiliarity of new personnel with the device, which strengthened the duty force and ensured the smooth completion of all work. In order to prevent accidents, we made an anti-accident plan for bus failures during work.

5. Each class used the time after dinner to discuss and check what gaps still exist in the compliance system of our station, and whether the existing rules and regulations can meet the needs of on-site standardization and standardization work, and read and implemented the Detailed Rules for Assessment of * * Station in the station, which was divided into 12 officials to manage the affairs in the station according to their personal abilities, stipulating that each attendant must work in accordance with the rules and regulations, otherwise it will be strictly assessed. In the gap between personal professional skills and job requirements, training plans should be made according to people's needs, and mental gas stations and personal promotion plan training platforms should be established for training. Work logs, maintenance records, safety activities, safety appliance records, defect records and other team records have been communicated with the work area, and the record format has been improved.

6. Train the personnel on duty in the whole station in the Electric Power Safety Work Regulations, the safety responsibilities of this post, the identification and preventive measures of dangerous points in the work and relevant professional rules and regulations, and send two personnel on duty to participate in the safety competition held in the work area, so as to train the personnel on duty to have the safety production skills needed for the work and be familiar with the dangerous points and preventive measures in each work;

7. Improve the "three votes" management system, and implement the "three votes" management system in accordance with the implementation of the occupational safety and health management system in the work area in combination with the actual situation of this station, with perfect content; Implement the "three tickets" according to the regulations, and strictly implement the "six customs" system of switching operation (operation preparation, order taking, operation ticket filling, drawing checking, operation monitoring and quality inspection); The filling and implementation of the "three votes" are in good condition. The "three votes" management system is sound, and the "three votes" qualification evaluation standards and assessment regulations have been formulated; The "three votes" qualification evaluation meets the standard requirements, and the improvement measures can be put forward in time for the problems found, and the records can be checked; Statistics, analysis and evaluation of the implementation of the "three votes" on a regular basis.

8. Audit Cangzhou Power Supply Company to implement management standards and implement relevant management regulations. Improve the "Regulations on the Management of Comprehensive Self-service Stations" of our station, and formulate measures to strictly implement them. Inquire about the management and software defects of five prevention systems, report them in time, and ask the manufacturers to sell the defects. Inquire about the implementation of the on-site anti-misoperation locking device and report the defects in time; Establish and improve the management system of unlocking keys, and strictly implement it; Strictly implement the operation monitoring system, revise the operation password again, and strictly manage the password, so that the implementation of the operation monitoring system has conditions since childhood.

What is the work pattern of safe production? Transverse to the edge, longitudinal to the bottom.

Reason: Safety production responsibility system is the core and foundation of safety production work, and the implementation of safety production responsibility system should be fully covered from horizontal to vertical.

The monthly safety work summary emphasizes the importance of safety and management.

Mainly write down the main work content, how to work hard and the achievements, and finally put forward some rationalization suggestions or new efforts.

Work summary is to let the superior know what contribution you have made and reflect the value of your work.

So you have to write a few points:

1, your understanding of the position and work

2. What on earth did you do?

3. How did you work hard and what things did you solve with your brain? Even if it's nothing, write something difficult. How did you solve it through hard work?

4. What abilities or knowledge do you need to improve in your future work?

5. The superior likes people who take the initiative to work. You should make all the preparations in your work, that is, the preparations in advance are as follows for your reference:

Summary is a comprehensive and systematic overall evaluation and analysis of the situation over a period of time, and analysis of achievements, shortcomings and experiences. Summary is a kind of applied writing, which is a rational thinking about the work that has been done.

Basic requirements of summary

1. Summary must have an overview and a description of the situation, some simple and some detailed.

2. Achievements and shortcomings. This is the main content of the summary. The purpose of summing up is to affirm the achievements and find out the shortcomings. What are the achievements, how big, how to use them and how to achieve them; How many shortcomings there are, what aspects they are manifested in and how they are produced should be clearly written.

3. Lessons learned. In order to facilitate the future work, we must analyze, study and summarize the previous work experience and lessons to form theoretical knowledge.

Summarize the precautions:

1. We must seek truth from facts, the achievements are basically not exaggerated, and the shortcomings are basically not narrowed. This is the basis of analysis and learning lessons.

2. Clear organization. This sentence is fluent and easy to understand.

3. Be detailed and appropriate. There are important things and minor things, so when you write, you should highlight the key points. The problems in the summary should be divided into primary and secondary, detailed.

Basic format of summary:

1, title

2. Text

Introduction: overview, overall evaluation; Summarize the full text.

Subject: analyze the shortcomings of achievements and sum up experiences and lessons.

Conclusion: Analyze the problem and make clear the direction.

Step 3 sign

Signature and date.

Why are new employees prone to safety accidents in the production process? New employees must be trained before taking up their posts, especially safety education and training.

Main learning contents:

1. Introduce the general situation, scale and development prospect of the enterprise, encourage employees to work actively and contribute to the prosperity of the enterprise;

2, introduce the company's rules and regulations and job responsibilities, so that employees consciously abide by the company's rules and regulations in their work;

3. Introduce the internal organizational structure, power system, inter-departmental service coordination network and process, and feedback mechanism of relevant departments;

4, business training, so that new employees are familiar with and master the main skills and related information needed to complete their jobs, so as to quickly become competent;

5. The key is to learn the safety measures of enterprises, so that employees can know what safety work includes, how to do safety work well, how to find and deal with common problems in safety work, and improve safety awareness;

6. Introduce the norms of employee behavior and manners. Such as requirements for professional ethics, environmental order, work and rest system, expenditure regulations, contact and service terms, appearance, mental outlook, speech, dress and so on.

There are cases in the factory safety production work report for reference only.

Shandong province flood prevention drought-resistant motor corps JIU detachment

Summary of Safety Production Month in 2005

We received the notice from Laiyang Water Conservancy Bureau on the establishment of "Safe Production Month" in 2005, and we resolutely implemented it according to the spirit of the document. To prevent and reduce production safety accidents, ensure the safety of people's lives and property, and do a good job in safety as the primary task of this unit. According to the requirements of "Safety Month" archives, our unit summarizes and reports the activities of "Safety Month" as follows:

First, the unit leaders and the safety production team attach great importance to it.

After receiving the notice, the unit leaders and the safety production team attached great importance to the safety month activities and arranged them in person. On May 25th, the arrangement, arrangement and requirements of monthly safety activities will be distributed to all departments and project offices in the form of safety production notice. According to the unified arrangement and requirements of the company, all departments and project departments of this unit have carried out safety production month activities such as safety production publicity, education, training and communication.

In February and June, according to the actual situation, the unit conducted safety education in the form of blackboard newspaper, bulletin board, etc., and put a publicity board of "I want to be safe and realize zero accident month" in front of the unit. Let every department and employee fully realize the importance of safe production. In the whole unit, a new wind of learning safety production knowledge has been set off.

Three, according to the requirements of the document, each unit of production safety team (including unit leaders) according to the characteristics of the unit of production safety work, combined with the city to carry out the "inspection, strict management, strict monitoring" activities, organize personnel to conduct a comprehensive safety inspection of all departments. Carefully check the office space and dormitory area of each department of the unit. Organize relevant personnel to conduct a comprehensive inspection of the construction area of Xiajia and Xiaoping Reservoir, including the project site, office space, living facilities and other parts; Technical measures for construction vehicles, fire safety and construction safety; Installation and construction focus on aerial work, hoisting work, cross work, etc. In particular, the flood control engineering facilities were inspected, and the problems were immediately rectified. Overall, the security situation is good.

Four, the project safety organization is established, the safety responsibility system is clear, and the employees operate according to the safety production management regulations.

The establishment of each project department can be based on>'s measures to set up a leading group of security organizations. Some projects under construction can be adjusted in time due to personnel changes; The safety responsibility system should be implemented in all departments, teams (sections), teams and groups and everyone, so that everything is managed and implemented; All types of work can be carried out in accordance with the safety production management regulations and safe operation methods, which are basically standardized and standardized.

Five, regular and irregular safety education, safety meetings, safety inspection, safety rectification.

Carry out safety education and special training on production safety. According to the work characteristics of the unit and the "Safety Production Activity Month", employees were given three-level safety education and post safety production training.

Carry out large-scale job training, and let employees become job experts as soon as possible through the activities of passing, helping and leading. Seriously organize employees to study "People's Republic of China (PRC) Safety Production Law" and its related laws and regulations, learn the safety production management methods of the unit, learn the operating procedures, and organize examination activities, so that employees can understand, understand and abide by the law through learning, be familiar with the safety operating procedures, and improve their safety awareness and level. And do special work, show certificates.

The project department can conduct regular and irregular safety education, safety meeting, safety inspection and safety rectification according to>. , and the project department staff safety education; At the same time of holding the production meeting, make arrangements for safety work at the same time, and implement, check and rectify it, so as to nip in the bud; Each team and team (section) shall conduct safety inspection once a week, and the project department may organize safety inspection once a month. Regular and irregular safety inspections and self-examination and self-correction activities have achieved good results.

Organize all employees to carry out the "trinity activity" of "watching an educational film, reading a safety knowledge book and participating in a safety production competition", which effectively mobilized the enthusiasm and initiative of employees to learn safety knowledge.

Six, to carry out various forms of safety publicity activities

Carry out safety publicity activities closely around the theme of safety activity month. Various project departments hold various forms of safety publicity activities, post safety slogans, write safety wall newspapers, make safety signs and warning signs, hold safety group education meetings, and create a safety atmosphere, so as to achieve the purpose of improving safety awareness.

Seven, to further strengthen the formulation and improvement of emergency rescue plan, establish and improve the early warning system of production safety.

Through safety production month activities, organize employees to carry out safety self-help skills competition, formulate perfect emergency plans for safety accidents, and carry out drills on accident prevention, escape and self-help skills. All departments further strengthen the formulation and improvement of emergency rescue plans. The leading members of the department are on duty, and they can be equipped with personnel and vehicles, advance driving routes and pre-designated hospital locations, so as to arrive at the scene of the accident as soon as possible after the accident, and equipped with simple medicines, with a clear division of labor, which can effectively carry out emergency rescue work.

All units should take the "Safe Production Month" activity as an important measure to promote the safety work of their own units, strengthen leadership in accordance with the requirements of relevant departments, carefully organize, highlight key points, and pay close attention to implementation to ensure the smooth development of various activities.

Shandong province flood prevention drought-resistant motor corps JIU detachment

June 24(th), 2005