Selected 5 Summaries of Supervision Personal Work

How to write the personal work summary of the supervisor? Supervisors on the construction site need to have a strong sense of responsibility and good endurance. Although the supervision work is very hard, it also exercises people's ability. Below, I have sorted out five selected personal work summaries of supervision, and welcome everyone to read them.

Personal work summary of supervisor 1

Looking back on the past and looking forward to the future, I have the joy of bumper harvest this year, and I also have eager expectations for the future. Happily, with the care and help of leaders and colleagues, I have carefully studied and understood the corporate culture spirit of the company, guided by the company's service concept, and successfully completed my work and the tasks assigned by the leaders through my unremitting efforts. Hopefully, I deeply realize that there are still many shortcomings in the supervision work that need to be studied and improved. I will sum up my experience, reflect on my own shortcomings, improve my supervision business level and become a member of the company in the process of better and faster development. This year's supervision work is summarized as follows:

I. Personal annual main work contents and job responsibilities.

20 _ _ _ mainly participated in the site supervision of soft foundation treatment project in the central business district of the development zone in the first half of the year, and mainly participated in the site supervision of artificial beach project in the tourist resort in the second half of the year.

In this year's work, I obey the arrangement of the leader and earnestly perform my duties. During my work, I never relaxed and strengthened my study of theory and practice. I was strict with myself, earnestly and enthusiastically served the construction unit, abided by the requirements of the supervision contract, and performed my supervision duties in strict accordance with the supervision norms and procedures.

In the process of construction, the process control of each working procedure is carried out by means of standing by, patrolling and parallel inspection. Investigate and study the quality and safety problems existing in the site, find out the root causes of the problems, ask the construction party to take effective solutions to solve them, and follow up and supervise the construction party to implement rectification throughout the process to prevent similar problems from happening again.

For materials (high strength geogrid, geotextile, fence board, presser foot block, stepping stone, etc.). ) approach, the relevant inspection data submitted by the construction party shall be inspected according to the standards and design requirements, and the appearance quality of the materials shall be inspected when entering the site. If the appearance quality does not meet the requirements, it shall not be used in the project.

For the construction of key parts of the project, arrive at the station in advance, check the construction preparation work, and make a written record of the station in time and completely.

Acceptance of concealed works shall be carried out in strict accordance with the acceptance specifications. If the acceptance is unqualified, rectification should be carried out, and the next working procedure can only be carried out until it is qualified. Inform the project management department of the construction unit of the problems found in the inspection in the construction process orally or in writing, and report to the director in time to urge the construction unit to carry out rectification and re-inspection. Try your best to do a good job of supervision in the construction stage of the project.

Second, the experience and feelings at work

In the process of supervision work, through the study of supervision theory and the cognition of the development state of supervision industry at this stage, I deeply realize that as a supervisor, taking the initiative to think about the interests of the construction unit, being responsible for the quality of the project and the safety of the construction personnel is the belief and infinite strength of supervision work. Only with high professional skills, comprehensive quality and good professional ethics can we really do a good job in supervision and embody the practice principles of law-abiding, honesty, justice and fairness.

Understand the importance of supervision work, establish a correct attitude towards supervision work, deal with various problems in construction with a realistic attitude, so as to effectively carry out work, actively use their professional skills and intelligence, scientifically and fairly exercise supervision rights and obligations, cooperate with the construction unit, meet the requirements of the construction unit, and provide quality and efficient services for the owners.

Three. Future work plan and personal career development advice

As a young supervision worker, I love my job, have a good work style and hard-working spirit, and my work attitude is strictly prohibited. I like to study the causes and solutions of problems in engineering supervision, and I am keen on accumulating solutions to engineering problems.

In the future work, we should conscientiously perform our post responsibilities, strictly follow the national standards, and carry out supervision work based on design drawings. In the work, we should constantly reflect on our own shortcomings, strengthen the study of supervision business, constantly improve our own quality, do a good job in supervision, strengthen the study of management theory knowledge, handle practical problems flexibly, conscientiously complete all the work assigned by leaders, and strive to raise our professional and technical level to a new level and truly become a qualified supervisor.

Four. Opinions and suggestions to all departments of the company

1. It is suggested that the company conduct targeted professional training for different employees and recruit more talents with professional qualification certificates who can work independently.

2. It is suggested that the company organize talents with good public relations skills and set up relevant departments to deal with the socialization of supervision industry and the openness and complexity of supervision bidding.

The concern and support of company leaders and comfortable working conditions have given me the motivation to work hard. The warm care and cooperation of my colleagues make me feel comfortable and practical in my work, and the unique corporate culture atmosphere of the company makes me full of confidence in my work. I firmly believe that I can do better in my future work and contribute to the development of the company.

Summary of personal supervision work II

As time went on, a year passed quickly. At the end of this year, review the work of the past year, calm down, sum up your work achievements and gains, find out the shortcomings, and facilitate future work. Summarizing the work in the past year, I sincerely hope that you will give me tips on improper summary, which will help me a lot. In the past year, with the strong support and care of the leaders of the company and the project department, I earnestly adhered to the guiding ideology of pre-control, standardization, science and high quality, firmly established the service tenet of ensuring the satisfaction of every owner, and worked hard wholeheartedly. Let's talk about my work and performance this year:

I. Information management

(1) Correspondence between units shall be registered by numbers respectively, and then the receipt processing sign shall be filled in, submitted to the director for approval, and submitted to the reading clerk as instructed. And promptly supervise and handle it in time.

(2) In order to facilitate the preparation of meeting minutes, attend every meeting on time and make records. Because the summary is an incisive exposition and high generalization of the meeting content, it is higher than the meeting summary. This involves the transformation of oral language into technical terms. If you don't understand, you will actively consult your colleagues and strive to make your work more perfect.

(3) Most of the data of the monthly supervision report comes from the monthly construction report. Before making the monthly report, we must study the monthly report of construction carefully and understand the details thoroughly. Only in this way can we judge whether some situations are true or not.

Second, the quality control of engineering construction

(1) After receiving the engineering construction drawings, I will be familiar with the drawings, understand the design intent, understand the main technological process and engineering characteristics of the construction process, record the objections on the construction drawings in writing, and submit them to the chief supervision engineer at the meeting of the blue prints.the design, which will be made clear by the design.

(2) Process control of all incoming materials and semi-finished products. In addition to checking the relevant inspection data submitted by the construction party against the standards and design requirements, I will also check the appearance quality of the materials when they enter the site. If the appearance quality does not meet the requirements, it will not be used in the project. For the construction of key parts of the project, it is necessary to arrive at the site in advance, check the construction preparations, and make written site records in a timely, complete and true manner throughout the construction process; Do a good job in daily patrol, inspection and inspection of each process of general construction. Inform the project management department of the construction unit in oral or written form of the problems found in the patrol, inspection and inspection in the construction process, report to the director in time, and urge the construction unit to implement the rectification and re-check the inspection. Do our best to do a good job in quality control before and during the project of engineering construction supervision, and do our job dutifully.

Three, safety and civilized construction control work

By studying the Law on Work Safety and my own experience in the process of work, I have established the viewpoint that safety prevention comes first, that is, work should be done well first, because accidents can be prevented, but they are unpredictable, and corresponding inspection systems should be established, and hidden dangers should be rectified in time. The supervisor has an unshirkable responsibility for the safety of the construction site. In addition to daily safety inspection and supervision and management (filing and sorting of relevant data records), we should adhere to the daily safety education of the construction unit, technical post safety technical education and post safety technical disclosure inspection (including safety account and written materials), conduct a comprehensive inspection of the site construction safety status regularly or irregularly every month, and file the safety inspection record account.

In view of the engineering safety control requirements put forward by the company leaders, deepen supervision and management, rectify the existing problems in time, require the construction unit to carry out rectification, urge the rectification and re-examine in time. My experience is that the quality control in the supervision of engineering construction process, especially the control of safe and civilized production, should and must be carried out with four diligence systems: eye diligence (to find problems in advance); Attendance on foot (mostly on-site rotation, patrol and inspection); Keep your mouth shut (talk more about the problems found); Manual attendance (make relevant records in time and notify in writing); Only by strengthening the inspection work and strengthening the control in the process can we do the work better and more seriously. The work in 2008 was both busy and full. In order to fulfill the supervision duties, I work hard, work hard, obey the leadership arrangement, never shirk, and think of the project wholeheartedly.

Summary of supervision personal work 3

Over the past year, I have resolutely supported the party's leadership and reform and opening up. Abide by national laws and regulations and do nothing illegal. Abide by social morality and maintain fine traditions. Insist on being honest and doing things in a down-to-earth manner. Be close to comrades with decent style and stay away from comrades with ulterior motives. Do not harm others and benefit yourself, as promised. Stay United and don't pull gangs. Do your own job well and complete the tasks assigned by the leaders. Personal work summary report for 20__ years is as follows:

1, 20 years of office work, year-end summary of "personal annual work summary". Under the leadership of _ _ office, do a good job in _ _ daily affairs, make personal work plans, and upload and issue them. Responsible for answering telephone calls, faxes, sending and receiving documents, filing and keeping. Compile the daily duty and holiday duty list of the fleet. Responsible for the registration and distribution of clothing. Do a good job in training and assessment. Do a good job of coordination with higher authorities. Do a good job in cleaning the office Obey the arrangement of leaders and participate in daily duty and law enforcement. Complete other tasks assigned by the leaders.

2, 20__ boat engine work. After receiving the sailing order, I made all the preparations carefully and checked all the indicators. Observe the state of the main engine carefully when on duty, and check the cooling water temperature and lubricating oil pressure. And assist sailors in berthing. Not afraid of being dirty, tired and hard, and successfully completing every sailing task. In daily maintenance, I follow the safety rules and operating rules. Carefully check the mechanical and electrical equipment of the whole ship, regularly check and maintain, and do a good job of charging and discharging the battery without interruption. Do a good job in adding and storing oil products. Do a good job in purchasing and keeping marine spare parts. Clean the engine room. Make all kinds of equipment of the ship in good condition and be ready to sail at any time.

Looking forward to 20__ years, I hope I can take an active part in physical exercise after work. Only with strong body can I work better and make a good personal work plan for 20__ years. Take an active part in various trainings to improve your ability and level. To read more books and gain more experience, you should visit the great rivers and mountains of the motherland. Try to overcome your impatience and look at things around you with a normal heart. Get into the habit of taking notes at work. Dare to speak at the meeting and put forward your own different opinions.

Summary of supervision personal work 4

Over the past 20__ years, under the correct leadership of the company, closely around the company's overall work ideas and priorities, we have continuously improved the level of engineering supervision and put an end to major safety accidents. Taking the company's quality goal as the work goal, and in line with the enterprise spirit of strict supervision, enthusiastic service, law-abiding, fairness and scientific integrity, I have basically achieved this year's work goal through one year's efforts. As a member of the supervision company, we will report our work and study this year to the leaders as follows:

First, the field work summary:

1. Master the engineering design drawings in the process of the project, find out the difficulties in quality control, determine the control objectives, and consult the construction specifications and quality inspection standards of various disciplines in this project to meet the needs of this project. Review the qualification and scheme of professional construction units entering the site.

2. Pay attention to the inspection and acceptance of materials and components in the site, and require the construction unit to attach the factory certificate to the materials in the site, and report to the supervision department in time for appearance inspection and quality certificate review of the materials in the site, and sign the materials for approval. The contractor is required to immediately remove unqualified materials from the site and shall not use them. At the same time, in the process of supervision, the materials used are tracked and supervised to prevent the contractor from shoddy and stealing the column when using materials.

3. Conduct on-site supervision on concealed works and key parts, and require supervisors to make on-site supervision records. Strict requirements are put forward for the construction inspection procedures of contractors' sub-items, so as to avoid the disconnection between engineering entities and data and ensure the synchronization of construction progress and data. For the quality, safety and progress problems existing in the construction process, first communicate orally, then ask in writing and follow up, and finally hold a special meeting to solve them. Organize special meetings on professional quality, safety and progress, and coordinate relevant personnel on site to conduct safety inspection on the construction site every week.

4. Work closely with the construction unit, review the construction progress plan prepared by the construction unit in advance, and put forward opinions on the unreasonable process arrangement of the construction unit after consulting with the owner and obtaining the consent, and ask it to make reasonable adjustments to make the progress plan meet the actual engineering needs. Before the construction of each type of work, it must be carried out in the example room, and it can be carried out on a large scale only after the supervision department and the owner check and accept it and form a written record at the same time. In the process of construction, the quantity of each single project should be completed quite well, and each project should be reported to the owner for confirmation in time.

Second, the existing shortcomings and suggestions:

1. In the process of work, I found that my professional level, professional skills and knowledge are limited. For example, a, the boundaries between some details acceptance specifications and mandatory provisions are not clear; B, at work, there are many verbal instructions to the construction unit; C, insufficient communication with the construction party, etc. As a result, the supervision work is very passive. In the future work, the control of the project schedule should also proceed from the implementation situation to avoid the disconnection between the schedule and the entity. At the same time, we should strengthen the study and accumulation of our own professional knowledge of safety production management to meet the needs of safety production.

2. It is suggested that the company can organize more experienced professionals to train our supervisors at an appropriate time to improve their professional level.

Third, the next work plan and experience:

As a supervision engineer, I haven't been an engineer for a long time, and there are still many shortcomings in my work. In the future, I will be more strict with myself, study my business hard, constantly update and supplement new knowledge, improve my business level and work ability, sum up my experience and better complete the supervision work.

Summary of supervision personal work 5

Under the leadership of the company, all the staff worked hard to practice Scientific Outlook on Development, worked hard in unity and cooperation, successfully completed the supervision task for 20 years, and achieved a double harvest of spiritual civilization and material civilization. Under the correct leadership of the project department, under the reasonable arrangement of the director and the director's representative, with the company's quality goal as the working goal, and in line with the enterprise spirit of "hand in hand to create * * * *", through one year's efforts, as a member of the supervision company, we will now report our work and study this year to the leaders as follows:

I am mainly responsible for the management of residential area C. Since 20 _ _ _ _ _ _ _ _ years, D and F have a good work style and a hard-working spirit. Strict working attitude and correct ideology and morality; Abide by national laws and regulations and the rules and regulations of enterprises; Obey the organization's distribution, suffer first, then enjoy, do your duty, and conscientiously complete all the work assigned by the supervision department. In daily work, I can be strict with myself, strictly perform my duties, stand on a fair stand and solve practical problems independently. In life, I can respect leaders and unite my colleagues.

The site management is chaotic. There are as many as 30 construction teams subcontracted by Party A alone, and the crossover operation is complex and lacks unified management, which leads to the chaotic situation of site management, and the personnel and equipment can not meet the construction requirements and the progress is slow. Due to the weak technical and economic strength of the construction unit, I actively put forward suggestions on the construction technology and construction technology of the construction unit; The problems found in the process require the construction unit to rectify in time, which avoids the reduction of the unqualified rate of finished products and speeds up the project progress.

In the actual supervision work, I require the construction unit to carry out total quality management, establish and improve the quality assurance system, and ensure that there are commencement reports, construction measures, technical disclosure, positioning review, materials and equipment tests, concealed engineering records, quality inspections, special inspections and completion data.

In the aspect of engineering quality control, we should combine active control with passive control, actively carry out supervision work, and focus on prevention. Review the contractor's qualification, focusing on the enterprise registration certificate and technical level, submitting relevant documents (copies), understanding the general situation of technical force, main building installation experience, etc. , and check the supply of sand, stone, cement, steel and the mixture ratio of concrete and mortar.

Control in advance to ensure that engineering quality accidents do not occur or occur less. Such as winter construction, low temperature, concrete pouring, masonry, wall plastering and other quality problems. It is not easy to guarantee. Therefore, the construction unit is required to provide a winter construction plan to prevent in advance and avoid freezing injury.

Strengthen process control. During the construction process, the supervision construction company found that the building materials used by the team had quality problems. Although the contractor has the quality inspection report of the laboratory, in the attitude of being responsible to the owner, this batch of building rhombic bricks was sampled by parallel inspection in time, and the construction unit was allowed to use it only after the strength indexes were determined to meet the design requirements. There are also quality problems in concrete pouring, masonry and wall plastering. In order to ensure the construction quality, I issued a supervision notice in time, requiring the construction unit to repair the defective parts to meet the quality standards required by the design and specifications.

In the construction of each working procedure, the construction unit is required to strictly implement the national and local construction and installation quality inspection system, check and confirm the relevant construction quality statements submitted by the construction unit in time, and review and sign the completed project quantities declared by the contractor according to the design documents and the provisions on the calculation of quantities in the contract.

Supervision record is an indispensable part of engineering supervision. I have a complete and sufficient supervision diary, which records the relevant situation of the construction site every day in detail, providing a reliable basis for solving the dispute between the owner and the contractor fairly.

The three-month supervision work has yielded a lot, but there are also shortcomings. For example, I am a civil engineering major, and I don't know much about the professional knowledge of electric power engineering, and I am not familiar with some process requirements. However, the supervision industry requires supervision engineers to have rich knowledge in many disciplines and industries. Therefore, I need to continue to study hard in various disciplines and constantly improve my business ability and professional level.

Looking back on one year's work, I have worked hard and sweated. While affirming my achievements, I still have many shortcomings: sometimes I feel that I exercise my supervisory power, pay little attention to the opinions of construction workers, pay little attention to working methods, and my working methods are not flexible enough; Due to the lack of understanding and thorough understanding of norms and supervision procedures, the decision-making ability in the work is lacking, and the work cannot be well coordinated in an all-round way; The overall arrangement ability is poor and the problem is not comprehensive enough. I intend to learn more about management coordination and on-site technical ability from leaders and colleagues in my future work. Rigorous words and deeds, speak according to, pay attention to grasp the scale when giving suggestions to the construction unit; Strictly abide by company discipline; Make more efforts in document processing and writing to ensure the accuracy and high universality of writing. Further do a good job in editing and editing engineering memorabilia, and improve the practicability of the monthly supervision report; Establish and improve various account management forms to ensure that all kinds of information are well documented. In the future work, I will try my best to practice Scientific Outlook on Development, correct my shortcomings, give full play to my advantages and make my own contribution to the construction and development of the company.