There are three-axis, five-axis and multi-axis spring machines, etc. What are the differences between spring machines with different numbers of axes?

Three-axis spring machine: Most of the previous spring machine equipment was based on three axes, namely the wire feed shaft, the cam shaft and the rotating core shaft, and the forming function was relatively limited. , which uses a single servo motor to control the wire feeding part. The eight cams on the panel are driven and controlled by a servo motor. Each corner knife can only form corners in a single plane. The forming function is relatively limited and requires manual adjustment. Cam phase, debugging is more complicated.

Five-axis spring machine: This is developed on the basis of the three-axis spring machine. Most of the situations are similar to the three-axis spring machine, but on the basis of the original three-axis, a spool and a curling shaft are added. This allows each cornering knife of the spring machine equipment to no longer be limited to a single plane, but can form three-dimensional folding corners. The forming function is strong and can achieve more complex forming.

Multi-axis camless spring machine: Compared with the above two spring machines, each cam on the panel is driven and controlled by an independent servo motor, which makes equipment debugging easier and has a great impact on production and processing efficiency. improvement.

The difference in the number of axes of the spring machine has a great impact on the processing forming and processing efficiency, and these usage differences will also be reflected in the price. The price of the multi-axis camless spring machine is relatively higher, so the company is When purchasing spring machine equipment, you should make reasonable choices based on your own needs.