Fire management system of wood flour factory

Safety production management system of xx Wood Products Co., Ltd.

first

The legal representative (director) of the company is the first person responsible for production safety, and is fully responsible for the company's production safety work.

second

Conscientiously implement the guidelines, policies and regulations of safety production, grasp the trends of safety production in the company, formulate the guidelines and objectives of safety production in the company, and firmly establish the ideological policy of "safety first, prevention first".

essay

Establish and improve the safety production supervision and management institutions, form the safety management network of the unit, and equip the safety management personnel to improve the safety management level.

Article 4

Improve the company's safety production management system and reward and punishment measures to ensure that the company's safety production work is planned, targeted, inspected, assessed and rewarded.

Article 5

Organize the formulation and implementation of the emergency rescue plan for production safety accidents of the company, and establish and improve the emergency rescue system of the company.

Article 6

Hold regular safety work meetings, study and solve major problems in safety production, and decide important rewards and punishments for safety work.

xx

Responsibilities of safety production management organization of woodwork Co., Ltd.

1. Assist the leaders to organize and implement the work of safety in production of the unit, and conscientiously implement the national laws, regulations and policies on safety in production.

2. Summarize and implement the safety production measures and plans of the unit, and urge the relevant departments to complete them on schedule.

3. Assist relevant departments to formulate or modify safety production operation rules and relevant rules and regulations, and supervise and inspect the implementation of these rules and regulations.

4. Conduct regular safety education and training for employees in a planned way, and cooperate with the safety supervision department to do a good job in safety education, training and assessment of special operations personnel.

5. Assist the leading organizations in daily safety inspection, urge and assist in solving problems in time, and have the right to order production suspension when finding major hidden dangers, and immediately report to relevant departments for handling.

6. Participate in the handling of casualty accidents, register, count and analyze casualty accidents, make accident predictions, assist relevant departments to put forward measures to prevent accidents, and supervise their implementation.

7. Supervise relevant departments to timely distribute personal protective equipment in accordance with relevant regulations, and guide employees to use it correctly.

8. Hold regular meetings (at least once a month) and invite front-line staff representatives to attend special meetings on production safety.

9. Complete other tasks assigned by superiors.

Fire safety management system of woodwork co., ltd.

1, fire safety work should be based on the principle of "prevention first, combining prevention with elimination", conscientiously implement the Fire Protection Law of People's Republic of China (PRC), and strengthen fire safety work.

2. The person in charge of fire safety is the first person in charge of fire safety management and must take full responsibility for fire safety.

3, fire safety, everyone's responsibility, all employees must pay attention to fire safety, the fire danger phenomenon and behavior should be a serious struggle.

4, strengthen fire safety publicity and education, do prevention and treatment, improve the ability of self-prevention. Personnel in key fire-fighting positions should be regularly educated and trained in fire-fighting professional knowledge.

5. Strictly implement the hot work system and the regulations prohibiting smoking in production area and warehouse area. The production area of the company is designated as the hot work area according to the first, second and third categories; Any hot work in the production area must be applied in advance according to the regulations before operation.

6. When hot work is carried out in the hot work area, the following provisions must be observed:

(1) If unsafe signs are found during hot work, stop the work immediately.

(2) Anyone who does not conform to the hot work approval procedures and violates hot work shall be ordered to stop immediately.

7, fire safety protection equipment, should be regularly testing, inspection and maintenance, to ensure that at any time in good condition.

Management standard of fire fighting equipment and facilities

1. The required fire fighting equipment shall be purchased, configured and registered for future reference.

2. No unit or individual may misappropriate, move, damage, occupy or bury fire-fighting equipment and fire-fighting facilities in various positions without authorization.

3, strengthen the maintenance and management of fire fighting equipment, fire fighting equipment should be placed in obvious and easy to get. The fire extinguisher should be placed in a dry place far away from heat sources, without high-temperature radiation, direct sunlight, suitable temperature, no chemical corrosion and no obstacles around.

4, indoor fire hydrant, set in obvious and easy to access, spacing should not be greater than 50 meters, the muzzle should be 0.20 meters from the ground.

5. Outdoor fire hydrants should be set along the road as required, and should be close to the roadside. Spacing and protection radius shall not exceed 120m, and underground fire hydrants shall be clearly marked.

6. Strictly implement the management standard of "three fixes and one delivery", that is, fixed-point storage, special management and maintenance, and regular inspection to ensure that fire-fighting equipment is always in a good and effective state. In case of emergency, used and invalid fire extinguishers should be filled or replaced. Empty bottles or mixed with real bottles shall not be placed in the production and construction site.

7. Fire fighting equipment and all fire fighting facilities are painted red for identification.

xx

Wood products co., ltd. safety production responsibility system.

1. Establish an organizational guarantee system with enterprise legal person as the first person responsible for production safety.

2, establish and improve the safety rules and regulations with the responsibility system for production safety as the core.

3, formulate safety production management plan and annual work plan and organize their implementation.

4. Popularize and apply modern management science and strengthen the scientific management of safety production.

5. Establish an efficient and sensitive safety information feedback system.

6, establish and improve the safety management files, strengthen the basic work of safety management.

7, leaders at all levels should put safety in production in the first place in all work, the implementation of safety management first leadership responsibility system.

8. Everyone is responsible for safety in production, and all employees must be responsible for the safety in production of their respective posts, and implement the responsibility system for safety in production for all employees.

9. Establish and improve the safety production organization system, and set up the safety production management organization under the leadership of the factory director (manager). The members are composed of the deputy factory director (manager) in charge of safety and the principal responsible persons of relevant departments, who are responsible for assisting the factory director (manager) to lead the safety production of the whole company.

xx

Responsibilities of safety production supervisor of Wood Products Co., Ltd.

Company legal person:

Main responsibilities:

The first person responsible for production safety is fully responsible for the company's production safety work. Responsible for organizing the formulation of the company's various safety production management systems and safety operation procedures, and examining and approving various safety production work plans and safety rules and regulations; Be responsible for holding special meetings on safety production on a regular basis to study and solve major problems in safety production in time; Responsible for other safety production duties stipulated by laws and regulations.

Person in charge of workshop:

Main responsibilities:

Be responsible for formulating and organizing the implementation of the company's work plan for production safety; Be responsible for formulating the safety operation rules and safety inspection rules and regulations for each type of work, and supervising the implementation to ensure that the processes, tools and equipment meet the safety requirements; Responsible for the safety education of new workers in the workshop, and often give safety education to employees.

Fire chief:

Main responsibilities:

The first person responsible for fire safety management must take full responsibility for the company's fire safety. Be responsible for formulating the company's fire safety system and supervising its implementation; Responsible for the training of fire safety knowledge and the management of fire equipment.