What is the salary like for CNC five-axis programming and operators?

The average salary for CNC programming is 5,097 yuan/month, the minimum salary is 2,000 yuan/month, and the maximum salary is 16,000 yuan/month.

CNC programming methods include manual programming and automatic programming, and there are fixed weekly overtime hours, dress code, team activities, and experience requirements for working years.

Extended information

Work requirements:

1. If the external R angle of the main electrode on the appearance surface is less than 0.2, add a partial enlarged view when tabulating , and indicate that this R corner is manually saved. ?

2. For the more complex rear mold with large cover, when removing the electrode, sometimes you will encounter a small rotten surface, and the interference body may not be generated during the interference inspection. In this case, the bottom surface of the electrode should be made transparent for inspection. Whether there is interference. ?9? New mold modification: When the electrode sheet has been programmed and the CNC has prepared the electrode, if you need to cancel the electrode or replace the electrode sheet, please follow up and complete it yourself. ?

3. After disassembling the electrodes, please issue a list of copper dimensions to the pipe manufacturer, and send the materials to the warehouse in time to avoid waiting for cutting time during CNC processing. ?

4. All steel materials use LYC (ELE) processing module, and electrodes use LYC (CU) processing module. The electrodes must be engraved with the electrode number, such as: N66-CAV-01F (R) Note: The electrode number with ?F? means fine male and ?R means rough male. This module cannot be changed at will. ?

5. When processing steel materials, the absolute coordinates must be at the top or above the workpiece. The number is taken from the center on all four sides or the center on one side. For irregular, oversized or smaller workpieces, the number should be determined according to the actual situation. Depending on the situation, it must be clearly marked to avoid processing errors.