Three model essays on the work summary template of the engineering department

Writing a work summary often helps to improve our ability to think independently. However, as long as we have done things ourselves, we will certainly be able to sum up our experience. The following are three sample essays of the work summary template of the engineering department that I share with you for your reference. You are welcome to read them.

? Model essay on work summary template of engineering department

? XXXX year is about to pass. Looking back on the past, under the correct guidance of the company's leaders, with the strong cooperation and active support of other departments, and through the joint efforts of all employees in our engineering department, we successfully completed all tasks and other temporary work assigned by the company.

? Here, I would like to briefly report to you the main work that has been completed and is under way in this department:

? First, the company's current situation.

? In view of the low first pass rate of our production line, our engineering department took the lead in proposing to control the quality from the source and reduce the generation of defective products. With the joint efforts of the quality department, the defective rate of SMT materials has been hovering around 18% until September, and now it has been reduced to around 4%. This point can be seen from our QC report, and our front-line maintenance workers have the most personal experience.

? Second, update the existing methods.

? 1, strictly standardize the inspection and confirmation of the samples submitted for inspection, and make every effort to ensure the first pass of the company's product production.

? 2. Actively listen to all kinds of feedback from front-line employees such as production and quality, comprehensively analyze and respond quickly, and determine the screen failure and flexible cord rectification scheme and implementation scheme of 536 machine. At present, the problem of FPC cable damage caused by the rotation of the pan/tilt has been solved. It is expected that an optimization scheme will be put forward before the Spring Festival to completely solve the current cable problem. If our engineering test passes, the previous two FPC cables will be abandoned. Just plug in a 20-pin shielded flat cable, which can not only improve the reliability and ensure the quality of products, but also facilitate the production operation of employees and directly reduce the production labor cost and BOM cost. I believe that the employees of our production line will be the first to be happy, because the operation is simple and easy, the efficiency will be improved, and more performance awards will be won next year.

? 3. Questioned the actual function of self-recovery fuses (about 0.35 yuan) used in all models of our company, and verified the rationality of the questioning through careful testing. Now it has been replaced by fuse resistance (about 0.08), which improves the reliability of the company's products and reduces the BOM cost.

? 4. The first "Video Incoming Inspection Standard (Trial)" was formulated. With the direct support of General Manager Tang, the construction of incoming inspection room in the quality department was promoted, and the skills training of quality-related personnel was organized. However, due to the fact that the incoming inspection room has not been fully operated, some equipment and tools have not been fully put in place. Perhaps everyone has forgotten the contents of my training? However, it doesn't matter if you really forget this. As long as you are willing to learn, our engineering department will continue to develop step by step in XXXX, and arrange engineers to train you in stages as needed to continuously strengthen and improve and help the quality department improve its control ability.

? 5. Our department conducted self-inspection, organized and corrected many remaining problems, updated the detailed description and accuracy of the BOM, and established hard rules such as uniqueness and rigor of sample confirmation (for example, the antenna gasket of 540D03 had the same material number before, but there were two different objects). Here, we can tell you for sure that this kind of similar situation will never happen again.

? 6. Established the system of issuing, signing, registering and confirming the ECN and other related documents of the engineering department, which is well documented, effectively preventing the occurrence of mutual buck-passing and buck-passing among departments, reducing time waste and improving work efficiency.

? 7. Completed the production of 520 and new prototype, as well as the guidance and tracking of trial production. The prototype of Darth Vader 52 1 and the latest prototype (model to be determined) are also under development.

? 8. At present, the problems of IRCUT effect of 532 and 536 models that marketers are most concerned about, such as out-of-focus at night, lens shake and poor focus caused by unsatisfactory thread of lens bracket, have made initial radical progress. The new supplier has modified the mold, and the initial samples have been tested on a 536-megapixel machine and achieved good results. Now the supplier is developing IRCUT with CS interface for model 532, and it is expected to send samples for testing on 1 3. Strive for these models to make our business colleagues happy to take orders and sell them boldly next year.

? 9. The process flow of the production line, the incurable diseases of the faulty machine and the engineering assistance requirements of the quality department have been basically dealt with in a timely, accurate and effective manner.

? Three, sum up experience, continuous improvement, consolidate the results.

? Although this department has achieved so little, there are still several problems that need to be improved and strengthened in the new year:

? 1. The thoroughness, preciseness, rapidity and predictability of development and design need to be improved to shorten the product promotion cycle and improve the product market competitiveness.

? 2. The quality of all kinds of engineering change documents and BOM list needs to be improved, especially the coding and description of key and special materials must be accurate, detailed and clear. Although faced with such a huge amount of data, it is impossible not to make mistakes. But we will use 200% care and patience to minimize our mistakes.

? 3, gradually improve the trial production process of new products, as far as possible in accordance with the formal engineering prototype, evaluation, trial production, small batch, and then finalize the production process, change the habit of rushing to go online before, and reduce unnecessary market risks.

? 4. The rapidity and effectiveness of production line defect analysis and temporary countermeasures still need to be greatly improved and strengthened.

? 5. Communication and cooperation with other relevant departments also need to be strengthened.

? 6. The technological ability and technical level of 6.PCB board factory and SMT chip factory, as well as the ability to track molds need to be strengthened. (I am currently applying for a new structural engineer. ).

? In the new year, we should quickly, accurately and concisely grasp the present situation of long-term and large-scale defective materials, especially the repair, selection and special use of shells. When technical problems are involved in the future, our engineering department will bravely shoulder this burden and correct the current non-professional counterpart situation focusing on procurement. Reverse the unfavorable situation that consumes a lot of human resources of the company but fails to achieve the expected results. For example, this time, 540D03 moved the mold and followed it once. It took three people, purchasing, quality and engineering, for two whole days on 26th and 27th. On 28th, our purchasing supervisor Li personally took the quality department personnel to the factory to supervise the array. By 30th, our quality department personnel were still there. But what about the effect? Still can't meet the satisfactory requirements. I believe that in XXXX, such technical work can be completely tracked and solved by the company's professional engineers.

? Model essay on work summary template of engineering department

? Time flies, unconsciously, a hopeful year will be accompanied by white and auspicious snowflakes. In the past year, together with our colleagues, we have overcome various problems, gained joy and encountered difficulties. That's it. We walked through Xia Dong in the Spring and Autumn Period in 2020 step by step. It can be said that this year is a crucial year for market expansion and sustainable development. Looking back on the past year, I felt a lot, gained a lot, strengthened my belief and made my thinking clearer. The work of the engineering department this year is summarized as follows.

? First, work hard and complete your task successfully.

? At the beginning of this year, with the care and help of the company's leaders, the engineering department started the post-installation and fine decoration project of xx project in an all-round way. Because our company used to focus on civil engineering, the managers were not proficient in decoration engineering, but we were not discouraged, did not feel inferior, studied with an open mind, consulted from many sides, overcame many difficulties, and finally made unremitting efforts to install and debug all aspects. At the same time, the decoration work of the second phase of xx project is being carried out in an orderly manner.

? Second, focus on the company and perform your duties seriously.

? Whether the subcontracted project is done well is closely related to the company, which not only directly affects the economic interests of the company, but also affects the overall image of the company. Since the re-establishment of the engineering department, we have strengthened the horizontal management of the branch according to the instructions of the company leaders. In order to realize planned, organized, regular and irregular inspection and supervision, the engineering department has held special meetings for many times to study plans and deploy tasks. Require inspectors to: carefully check and record; Strict supervision and notification. Put forward rectification opinions and implement the rectification effect.

? In view of the project with major hidden dangers in engineering quality, safety and civilized production, serious criticism is put forward and rectification is made within a time limit. Every inspection found a great improvement over the last one, and the effect was remarkable, and no quality and safety accidents occurred. At the same time, it also helps and improves the technical level of the engineering manager to varying degrees. Through this activity, we not only exercised our team, but also enhanced the company image.

? Third, cooperate with other departments to do a good job.

? In order to cooperate with the company's investment budget, the engineering department has sent people to the industrial park dozens of times to personally measure and draw according to the facts. Collect settlement data and cooperate with the operation department to make project settlement. Assist the office in the relocation of the company. The engineering department sent people to pack office supplies, load cars and escort them, and actively carry valuable and bulky items, which made due efforts for the smooth relocation of the company on schedule and the construction of the company's staff canteen.

? Four. Experience and gains

? Only by putting yourself in a correct position and trying to be familiar with your work can you make a difference. Take the initiative to integrate into the collective, handle all aspects of the relationship, in order to do the work handy. Only by focusing on the interests of the company, regardless of the gains and losses of the interests of departments and individuals, can we have greater gains. Learning with an open mind and constantly pursuing progress can keep up with the pace of the company's development.

? V. Existing shortcomings

? In the past year, there are still many shortcomings in quality control, such as unclear management ideas, lack of emphasis, single quality control means and no whole process control system. Progress is often emphasized, but the hierarchy of construction procedures is ignored. The construction scheme often changes, resulting in the contradiction between progress and quality. Safety and civilized management has been greatly improved compared with the past, and it has been put on the work schedule of the engineering department and has become the top priority of the engineering department. But there is no clear goal, especially for subcontractors, and there is no effective coercive force and terrible binding force. Insufficient attention is paid to contract management, which is manifested in the unclear contract disclosure, the project manager is not very clear about the contract content, and even has never seen the contract of the project he manages. Many projects don't have contracts at all, so problems can't be dealt with timely and effectively according to the contracts.

? 2020 is a crucial year for the engineering department. There are many and scattered projects, tight construction period and heavy tasks, large handover area and few management personnel. There is light in difficulties, and joy in hardships! This requires us to go all out, implement quickly, enhance ideological awareness, improve work efficiency, ensure the smooth realization of the annual goal, and work hard for the company to move towards collectivization!

? Model essay on work summary template of engineering department

? In a blink of an eye, it will be the end of the year and the New Year will be ushered in immediately. In this year-end season, I make a detailed summary of my work in the past year.

? At the beginning of this year, a detailed inspection and maintenance of the whole fire protection system of this building was carried out. The fire fan, fire pump, fire broadcast, gas fire extinguishing and the whole automatic fire alarm system were inspected in detail. Among them, control, alarm and information feedback tests are carried out for each system unit one by one. In this test, some fans, smoke detectors, water pumps and fire dampers were found to be faulty. Then, immediately summarize the existing problems and arrange maintenance. In this maintenance, some faults are historical problems that have not been solved for many years.

? The professional actively consulted the information and immediately repaired the root cause of the failure. If some faults cannot be repaired by this professional, contact the manufacturer immediately after confirming the faults and ask the manufacturer to send someone to repair or replace them. In the process of inspection, testing and maintenance of fire protection system, the biggest workload is the maintenance of fire dampers in the whole building. Fire dampers are generally installed at the inlet and outlet of the air duct, and there are a large number of valve bodies in the closed roof. Whenever the valve body is repaired, the maintenance personnel always have to carry a high ladder, either on a high ladder or in person. The seemingly simple work is actually difficult to maintain, and sometimes even the whole fire damper has to be disassembled and repaired before it can be put back in place. At this time, the system alarm test should be carried out for the faulty valve. After confirming that the fault has been eliminated, the maintenance should be analyzed and summarized, and the maintenance records should be made. According to statistics, in this maintenance, the producer of China * * * overhauled more than 20 fire dampers in the building.

? With the increasing popularity of the building, some well-known large enterprises have begun to live in the building, such as Cabrio, TravelSky and Hitachi in China. In order to generate income for our company, this professional actively undertook the comprehensive wiring work of his company, which also paved the way for the overall wiring level of the building and the rapid inspection and maintenance in the future. During the wiring construction of these companies, my professionals took the initiative to work overtime to ensure that the construction period was completed on time.

? In the construction process, some trunking is in the ceiling, so the wiring personnel must drill into the sultry roof and lead the cable with thick wrists from the interlayer room to the user's computer room along the bridge, which may pass through the user's rented area on the way. It can be seen that the construction is very difficult, and the construction quality must be guaranteed with few professionals. In the construction of right integrated wiring, due to the special customers and strict wiring requirements, four long-distance optical fibers must be led to the user's computer room. In actual construction, the primary problem is to protect the optical fiber, and it is very difficult to penetrate a meter-long optical fiber into sheath line. Through the efforts of all the staff in this major, the pipeline was finally connected skillfully and intact, and the project was finally submitted on time and recognized by customers.

? In the daily maintenance, in order to quickly and conveniently eliminate all kinds of equipment failures, this professional first carried out a detailed inventory of the fire protection system in the building, printed out the address labels of all modules, and checked and labeled them one by one. This job is actually very exhausting. First, confirm the actual installation address of the module from the fire engine, and then bring the ladder to the site. Usually, the fire protection module is installed at the top of the room. This major has to climb the sultry roof and look for modules on the roof. After finding it, he can confirm that it is consistent with the logo of the host computer, then put a label on it and leave. After nearly a month's efforts, more than 800 tiny points in the building were finally checked and marked one by one.

? At the same time of these works, the security system has a puzzling failure. There will always be multiple loops disconnected irregularly. After this failure, the security monitoring system failed and the patrol system could not work normally. The professional immediately repaired the whole security system. After many efforts and manufacturers' assistance, the fault was finally confirmed and the system equipment was replaced. In this difficult fault confirmation work, it took us more than a month professionally to finally restore the security system to normal.

? Because the building has been built for more than two years this year, the fire probes in the building should be cleaned according to the fire protection system specifications. Before cleaning, there are indeed a few smoke alarms that cannot be reset and eliminated immediately, which has a certain impact on the fire protection system. So this major immediately cooperated with the manufacturer to clean up the smoke and temperature in the building. The workload of smoke removal is huge. Because there are nearly two thousand smoke and temperature senses in the building, everyone has to climb ladders or push elevators instead. This major has overcome the difficulties of few personnel and heavy workload. After more than a month of disdainful efforts, he finally dismantled the smoke temperature sensors in the public * * * area and a small number of rental areas in the building, sent them to be cleaned, and labeled them one by one to make records. According to statistics, there are more than 100 cigarette smoke after cleaning. Then, in the automatic fire alarm system, they are closely observed and tested one by one. In the following two or three months, the small smoke temperature fault returned after cleaning was immediately repaired, ensuring that there was no fault in the fire fighting system.

? Looking back on these past events, it is still like yesterday. After more than a year of hard work, the contribution of my professionals to the whole company or the whole building is obvious to all. But for now, although the labor paid in the past is hard and arduous, new problems will always appear and new mistakes will always appear. My professionals will continue to stick to their posts, create a safer, more comfortable and more ideal office environment for our company and customers, and erect the banner of "peace and harmony first" in the property circle.