What is the property height required by the cinema?

Because most of the latest 3D special-effect seats are stepped, the number of seats in the cinema is required to be proportional to the height of the floor. The more seats, the higher the requirement for floor height. Usually the height of the cinema is more than 4 meters.

When there are walkways on both sides of the cinema, the number of seats shall not exceed 22 at most; Only when there is a walkway on one side, the number of seats shall not exceed11at most; When there are transverse walkways, there can only be 10 rows in the back row at most, and the longitudinal and transverse walkways should be more than 1.2 meters, and seats for the disabled should be reserved.

Because the cinema system is a complex set of equipment with sports ability, if the cinema is built on the first floor, when there are many special seats, the load-bearing performance of the floor must be considered. Only within the load-bearing range can the cinema be built better.

Extended data:

Matters needing attention in cinema construction:

1, theater ceiling

In the decoration of cinemas, more loudspeaker equipment is usually installed, and good sound-absorbing materials are needed for sound insulation to prevent crosstalk between cinemas. As a public place, cinemas need to install fire-fighting equipment according to fire-fighting requirements, such as fire extinguishers, fire buttons, multifunctional alarms, fire hydrants and so on.

2. Cinema doors and windows

Generally, the doors and windows of cinemas are open to the outside world, and there are no stairs at the door to prevent the audience from falling down. Generally, the width of the door is at least1.4m, and the door panel is well soundproofed and fireproof. Windows and doors need to be covered with curtains to ensure the viewing effect of the cinema.