How to pressurize the water on the fifth floor if it is too small?

The best solution of water accumulation on the first floor and the fifth floor

1, a small booster pump of 60W to 80W can be connected to the water supply valve on the fifth floor, and the booster pump can be bought from ordinary hardware stores.

2. The installation of booster pump is not complicated. When installing the booster pump, the water flow direction should be consistent with the direction of the arrow on the pump body, and it should be installed at the lowest water level as far as possible, which is more convenient for use or maintenance.

Second, the reasons for the low water pressure

1, the water pressure is too small, which may lead to low water pressure. You can ask the neighbors if they have this phenomenon. If the whole floor is like this, you can find a property to repair it.

The faucet is blocked. If the local water quality is not very good, there will be a lot of rust and sediment in tap water. After a long time, the faucet will be blocked and the water output of the faucet will be smaller and smaller.

Water pressure:

Generally, the tap water pressure is about 0.7 kg, and 1MPa is equal to 10 kg. 1MPa= 10kg/ cm2, and MPa MPa is the new unit.

According to the tap water supply standard: tap water is generally considered as 0. 1MPa = 10m, and the water supply pressure at the end of the pipe network stipulated by the state is 0. 14Mpa. More intuitively, 0. 1mpa is equivalent to a standard atmospheric pressure, and the water supply pressure at the end of the pipe network is 0. 14Mpa, which is equivalent to the faucet leaving the water supply tower. Therefore, the higher you live, the lower the water pressure will be.