Commitment letter for construction safety

In our study, work and life, we all have direct or indirect contact with the letter of commitment, which must be made within the validity period of the offer. So, how to write a letter of commitment? The following are eight construction safety commitments I have compiled for reference only, hoping to help you.

Commitment letter for construction safety 1 1. Project name: Building B 1~4 and basement of Longxin Jiuxi Phase II.

Two. General situation of the project: this project is a basement and the ground is a frame-shear wall structure.

Three, steel engineering construction requirements:

1. Construction reinforcement shall have factory certificate, quality inspection report and test report.

2. Paint and granular or flaky rust are not allowed on the surface of steel bar.

3. Before the installation of steel binding, you should be familiar with the construction drawings, and check whether the specifications, diameter, shape, size and quantity of the required steel bars are consistent with the ingredient list, material card and drawings. After the steel bar is straightened, there is no local bending, and the material is cut according to the ingredient list, and the end is straight and tidy to ensure the design requirements.

4. When the height of the beam is small, the steel bar of the beam will be tied to the top of the beam formwork overhead and then fall; When the height of the beam is larger (≥ 1.0m), the reinforcement of the beam shall be bound on the formwork at the bottom of the beam, and then the formwork on both sides or one side shall be installed. The reinforcement of the plate shall be bound after the formwork installation.

5. When the longitudinal steel bars of the beam are arranged in double layers, short steel bars with a diameter of ≥25mm or more should be padded between the two rows of steel bars to keep the design distance. Stirrup joints (where hooks overlap) should be staggered on two vertical steel bars.

6, plate steel mesh binding, two rows of steel bar intersection around each point should be fastened, the middle part of the intersection can be staggered fastened, but must ensure that the steel bar does not shift. For the steel mesh with two-way main reinforcement, all steel bar intersections must be fastened. When using double-layer steel mesh, steel braces should be set under the upper steel mesh to ensure the correct position of steel bars. When binding, pay attention to the wire buckle of the eight-shaped adjacent binding point to avoid the skew deformation of the mesh.

7, should pay attention to the negative reinforcement on the upper plate, to prevent being trampled; Special awnings, overhangs, balconies and other cantilever plates should strictly control the position of negative reinforcement.

8. The steel bars at the frame joints are interspersed very densely. Special attention should be paid to the clear distance between the main bars at the top of the beam should be 30mm, and concrete pouring should be carried out.

9, beam slab steel binding, should prevent water and electricity pipelines affect the location of the steel bar.

10, steel bars should be cold-worked, and heating and bending are strictly prohibited. The specification, steel grade, shape and size of bending steel bars must conform to the drawings, and shall not exceed the allowable deviation, and there shall be no cracks or distortions at the bend.

165438+

12. For the binding of steel mesh of plate members, the intersection of two rows of steel bars should be fastened at every point, and every other one in the middle part is plum blossom or splayed. In order to avoid skew deformation of mesh during transportation and installation, temporary reinforcement measures should be taken to tie the mesh with steel bars.

13, check the grounding of all parts of the welding machine before welding steel bars, adjust the transformer stage, and turn on the cooling water supply switch before work. Both ends of steel bars shall be straight, and the deviation of axes of two steel bars shall not exceed 0.5mm..

14, the continuous reinforcement method is adopted for the reinforcement of this project, so as not to lose short joints as much as possible and save reinforcement.

15, the supporting iron horse reinforced by double plates must be installed accurately. 300 meters away from the edge of beam and post-cast strip must be set.

16. Butt welding and vertical welding shall be adopted for steel bar extension, and gap welding shall not be adopted.

17, self-inspection qualified components should be timely inspection, so that the next working procedure construction.

18. Strictly implement the corresponding clauses in the contract.

Fourth, the construction safety:

1. The installation operator of the steel bar worker shall carry out the construction in strict accordance with the construction drawing, construction scheme and working procedure.

2. The working height of the steel bar project is 2m or above, and the operation protection shall be carried out in accordance with the requirements of Technical Specification for Safety in Aerial Work.

3, the operator is not allowed to climb the template, are not allowed to walk on the independent beam and other narrow and unprotected template surface.

4. All workers' tools and steel parts should be put in the tool bag to avoid falling and hurting people.

5. All operators should meet the requirements of "Three Guarantees". Don't destroy the "four ports and five sides" protection facilities.

6, not illegal construction, risky construction, found hidden dangers should immediately report to the foreman.

7, shall not be illegal use of machinery, electrical appliances, to prevent mechanical injury and electric shock accidents.

8. Before June 10 of each month, the personnel list of each group must be reported to the project department, and relevant "three-level education" and "safety training" must be accepted.

9, arrange the specialist is responsible for the site materials, do civilized construction.

10, the personnel shall be responsible for getting on and off the materials, so don't rob them. When lifting materials, it shall meet the lifting safety requirements and obey the instructions.

1 1. Strictly implement the requirements of Technical Specification for Safety in Building Construction.

Article 2 of the Commitment on Construction Safety is to ensure the construction safety of this _ _ _ _ _ _ _ _ project.

_ _ _ _ _ _ solemnly promises that it will be responsible for the safety management within the scope of this project according to the construction contract, and the basic contents of the commitment are as follows:

1. During the construction period, Party B promises to define the safety responsibilities in strict accordance with Party A's requirements and "_ _ _ _ _ _" and "_ _ _ _ _", do a good job in the construction organization design and technical disclosure of construction safety, and obey the daily management and inspection of relevant departments of Party A. ..

Second, Party B promises to provide safety education to the construction personnel of this unit, and has a sound safety management system and training and education records to ensure that the construction personnel do not violate _ _ _ _ _ _ _ and national laws and regulations. Obey the supervision of Party A. ..

Three. When handling the construction permit, Party B shall submit a copy of the certificate of special operation personnel and ID card of construction personnel of the unit to Party A for filing, and handle the "Temporary Construction Permit" as required. And accept the company's supervision and inspection, vouchers in and out of the construction site.

Four. Party B promises to carry out civilized construction, ensure that major safety accidents and major industrial accidents do not occur on the construction site, set up a person in charge of on-site safety, and often explain the guarantee of construction safety and the implementation of the construction plan to the relevant departments of Party A to ensure the safety of construction personnel, Party A and third party personnel and property. In case of any accidents or casualties caused by construction, the construction party promises to take full responsibility, which has nothing to do with Party A. ..

Verb (abbreviation of verb) Party B promises that the construction personnel will consciously abide by Party A's safety management regulations. If man-made unsafe acts endanger personal and property safety, they must be rectified unconditionally and immediately, accept the inspection and supervision of Party A's functional departments, and resolutely rectify the problems in the Notice of Rectification of Non-conformance issued by Party A's relevant departments.

When Party A's supervisors find that there are major unsafe factors, they have the right to ask the construction party to stop work and rectify at any time, and the construction party shall not continue to work illegally.

Seven. Party B promises that if the safety of personnel and property of Party A and the third party is damaged due to improper construction, it will make full compensation according to the degree of loss and accept a fine from Party A according to the circumstances.

Eight. Party B promises that during the construction period, it will not affect the personnel, health and environmental safety of surrounding villages and towns, be responsible for all the adverse effects caused by the construction personnel of this unit, and do a good job in safety precautions such as power consumption safety and fire safety.

Nine. Security issues include but are not limited to the above. For matters not covered, refer to national laws and regulations and the terms of this undertaking.

This undertaking is made in duplicate. (Party A keeps one copy on file and Party B's construction unit keeps one copy)

In order to effectively prevent and eliminate all kinds of unsafe factors in engineering construction and realize the dual goals of "excellent engineering" and "safety engineering", our unit promises as follows:

First, ensure that the construction safety (warning) rules are set at the eye-catching place of the import and export of the construction site.

Second, formulate the construction safety management organization and safety management responsibility system, provide full-time security officers for engineering construction projects, and earnestly implement the construction safety management regulations.

Three, all engineering construction personnel must go through safety education and technical operation training, special type of work operators must hold the corresponding technical qualification certificate.

4. Eye-catching warning signs should be set up in key places, parts and parts of safety management in engineering construction.

Five, all kinds of auxiliary materials (equipment) needed in the construction should have product certificates, and the installation and use of auxiliary equipment should comply with the safety management regulations. And strictly implement the safety operation procedures.

Six, the quality of engineering construction raw materials must be qualified products.

Seven, this unit is willing to consciously accept the employer, supervision, supervision unit (person) and the social from all walks of life to the supervision of production safety in engineering construction.

Eight, during the construction of any safety accidents, this unit is willing to take full responsibility.

Construction unit (signature):

Xx，xx，XX，XX

Letter of Commitment on Construction Safety to XXX Company 4

_ _ _ _ _ _ _ _ _ _ _ _ (hereinafter referred to as "the company (person)") is entrusted by _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.

Time limit for a project: year month day to year month day. The number of construction workers is about

Object: people (list attached).

This unit (individual) hereby declares that it is willing to accept and abide by _ _ _ _ _ _ _ _ _ _ _ (project name).

All management provisions in the whole specification, including but not limited to compliance with the following clauses:

1. This unit (individual) promises to abide by all laws, regulations or policy documents formulated by the state and Beijing, and all rules and regulations of property management in _ _ _ _ _ _ _ _ _ _ (project name) formulated by your company.

2. Our unit (person) promises to abide by the temporary management measures or restrictive measures promulgated by Beijing from time to time and carry out such measures according to your requirements, so our unit (person) will not make any claim against your company.

Three. This unit (person) promises to abide by the Notice on Quality and Safety Management of Construction Site (Jian Jian San [20xx] No.248) and other regulations on the construction safety of aerial workers and construction personnel.

Four. In addition, this unit (person) also promises: 1, this unit (person) and its staff have all legal qualifications and work permits that match this construction, and

Ensure that such qualifications and permits remain valid during the construction period; 2, strictly abide by _ _ _ _ _ _ (project name) on noise, dust, toxic and harmful gas construction management regulations; 3. All personnel involved in this construction hold relevant qualification certificates and have legal qualification conditions for post construction; 4. This unit (individual) has purchased safety insurance for all personnel involved in the construction and distributed necessary labor protection articles;

5. Climbers should carefully investigate the site and make corresponding safety management plans according to the work requirements, the characteristics of buildings and the requirements of aerial work; 6, configuration full-time security officer, conscientiously do a good job of construction personnel's safety in production and safety technical knowledge education. Improve the safety awareness of construction personnel and urge them to consciously abide by safety disciplines, systems and regulations to ensure foolproof; 7, to ensure that there is enough technical force to safely operate related machinery and equipment; 8, must obey the supervision and inspection of your company; 9. Carry out the construction according to the construction time plan formulated by your company;

10, you must obey your company to handle temporary construction permits for construction personnel; 1 1. In case of extreme weather (such as gale of magnitude 4 or above), our company will report to your company in time and stop working with your consent; 12. appoint relevant personnel according to the list of construction personnel listed in this letter of commitment, and notify your company days in advance if there is any change; 13. Observe the work flow of construction personnel entering the site listed in this commitment and the relevant modifications and explanations made by your company from time to time. V. Our unit (person) promises that the responsibility for safety accidents or losses caused by the following reasons shall be borne by our unit (person). 1, violating normal operating procedures; 2. Refusing to comply with the safety guidelines of the property management company; 3, the construction personnel without a license; 4. The construction personnel have no valid insurance certificate; 5. Construction personnel damage public facilities and equipment during construction;

6, construction personnel in the process of construction with or without casualties; 7. Other accidents that violate laws and regulations or the provisions of this undertaking. This letter of commitment shall come into effect as of the date of issuance.

Person in charge of the unit (person) (seal):

Letter of Commitment on Construction Safety (5) For the construction projects undertaken by our company, our company is based on the safety production agreement signed with the project management department of the National Special Equipment Test Base of Beijing Urban Construction No.7 Company [construction site safety management (special type of work), fire control, public security, machinery (equipment) safety, temporary electricity consumption safety management, life (dormitory, food) safety management, safety protection, green construction, education, etc. ] and the actual situation on site. Our company promises to confirm the above safety management matters, be fully responsible for safety production management in accordance with national, local, industrial and enterprise laws and regulations, and bear legal and economic responsibilities.

We promise to pay a deposit of 65,438 yuan+00,000 yuan (ten thousand yuan only) to the project manager department of the National Special Equipment Test Base of Beijing Urban Construction No.7 Company.

We promise to appoint 1 full-time safety management personnel (employment certificate) to be responsible for safety education, protection, fire control, public security, machinery (equipment) and living quarters management on the construction site.

We promise to bear legal and economic responsibilities for any general accidents and other accidents in construction and production activities.

We promise that all personnel who enter the site to participate in the construction are legally registered personnel, and we will not temporarily recruit other personnel. If there is malice and novelty, we will bear all the responsibilities.

We acknowledge that the Project Management Department of the National Special Equipment Test Base of Beijing Urban Construction No.7 Company has imposed economic penalties on us for illegal command, illegal operation and violation of labor discipline in daily construction and production activities, and imposed a fine of more than 200 yuan per person and more than 500 yuan per person.

Hereby promise!

Organizer (signature):

Legal representative of the commitment unit:

(or authorized agent)

Time: 20xx MM DD YY

Commitment letter for construction safety 6 In order to ensure that no safety accidents occur during the whole construction period, our unit makes the following commitments to the engineering headquarters:

1. Ensure that the safety precautions during construction are carefully organized to ensure that no safety accidents occur during construction. In the event of a safety accident, all consequences shall be borne by the unit itself.

2, establish and improve the site safety, transportation safety, earthwork safety, electricity safety, all kinds of mechanical safety and other safe operating systems.

3, equipped with full-time security officer, hanging safety construction slogan.

4. Ensure that all working procedures are carried out according to the construction laws, design drawings and requirements of the supervision unit.

5. The engineering construction involving changes must be carried out in declare in advance according to the approved construction drawings, and the construction organization design and safety construction scheme shall be prepared.

6. Always remind construction personnel, construction vehicles and mechanical drivers to pay attention to safe construction.

7. Formulate feasible emergency plans for construction accidents.

8, into the foundation pit wall personnel do wear safety helmet.

9, the construction site before start working, according to the construction general layout and division, subdivisional work layout, arrange the location of the construction shed, materials piled up.

10. The pits, wells, ditches, steep slopes and lines in dangerous areas on the construction site should be marked with "Danger" or "No Access", and red light signals should be set at night.

1 1, the roads on the construction site must be kept clear, there is enough lighting for construction at night, and the erection of electrical lines must meet the requirements of electrical regulations.

12. Materials and equipment on the construction site must be neatly and firmly stacked, and the dismantled templates and leftover materials should be cleaned up in time.

13, the food hygiene of the construction site must comply with the provisions of relevant laws and regulations.

14, excavation construction must leave a certain slope according to the soil conditions (the slope depends on the soil conditions).

15, the construction site that may affect the safety of pedestrians must set up obvious safety warning signs.

16, mechanical operation, someone must be on-site unified command operation.

17. Before operation, the driver should check the machinery and safety braking device in detail to ensure safety and reliability. All mechanical drivers must hold relevant certificates.

18, the operation and use of all kinds of machinery must be carried out in accordance with the operating procedures of the machinery itself.

19. All bridges and culverts, roads, original sewer pipes and all wires and cables along the construction line shall not be damaged.

Commitment unit: Commitment person:

date month year

Letter of Commitment for Construction Safety 7 In order to ensure the construction safety of the Christmas Meichen project in Moon Star Global Port, XXX, the person in charge of this project, solemnly promises that he will be responsible for the safety within the construction scope according to the construction contract. The basic contents of the commitment are as follows:

1. Obtain the qualification certificate of the corresponding level according to law, and undertake the project within the scope permitted by the qualification level.

2, the main person in charge shall be fully responsible for the safety production work of this unit according to law. Establish and improve the safety production responsibility system and safety production education and training system, formulate safety production rules and regulations and operating procedures, ensure the investment of funds needed for the safety production conditions of the unit, conduct regular and special safety inspections on the construction projects undertaken, and make safety inspection records.

The person in charge of the project shall be a person with corresponding professional qualifications, who shall be responsible for the safe construction of the construction project, implement the responsibility system for production safety, rules and regulations for production safety and operating procedures, ensure the effective use of safety production expenses, organize the formulation of safety construction measures according to the characteristics of the project, eliminate hidden dangers of safety accidents, and report production safety accidents in a timely and truthful manner.

3, the establishment of safety production management institutions, equipped with full-time safety production management personnel.

Full-time safety production management personnel are responsible for on-site supervision and inspection of safety production. Timely report the hidden dangers of safety accidents to the project leader and the safety production management organization; Those who command or operate in violation of regulations should be stopped immediately.

4. Special operators such as welders, installers and dismantlers, electricians, masonry workers and climbers can only work at their posts after receiving special safety training in accordance with relevant state regulations and obtaining special operation qualification certificates.

5, in the construction organization design, the preparation of safety technical measures and the construction site temporary electricity scheme. For high-risk partial projects, according to the relevant provisions of the state, province and city, prepare, review and demonstrate special construction plans, and organize their implementation after meeting the requirements.

6. Before the construction of a building project, the technical personnel in charge of project management shall explain the technical requirements for safe construction to the construction team and operators in detail, and both parties shall sign for confirmation.

7. Professional electricians shall be responsible for the electricity consumption on the construction site, and all kinds of gases used shall be strictly implemented in accordance with state regulations.

8. Separate the office, living area and working area of the construction site and keep a safe distance; The site selection of office and living quarters meets the safety requirements. Workers' meals, drinking water, rest places, etc. Meet health standards. Staff quarters shall not be set up in uncompleted residential flats.

9. Take special protective measures for adjacent buildings, structures and underground pipelines that may be damaged during construction.

10. Operators shall abide by the mandatory standards, rules and regulations and operating procedures for safe construction, and use safety protection appliances and mechanical equipment correctly.

1 1. Purchase and lease safety protection appliances, machinery and equipment, construction machinery and accessories with production (manufacturing) licenses and product certificates, and inspect them before entering the construction site.

12, handle accidental injury insurance for personnel engaged in dangerous operations on the construction site.

Date:

date month year

Xinjiang Tonghui Real Estate Development Co., Ltd. Construction Safety Commitment Letter 8

In order to complete the construction of this power project better and faster, and ensure the power transmission and operation of the project as scheduled; My unit has the honor to win the bid in the bidding for construction equipment, and hereby solemnly promises:

1. All docking and communication with the power sector in the early stage shall be fully coordinated by Party A until the power transmission project is completed.

2, in the process of project implementation, we fully respond to all the terms of the tender documents, fulfill the contractual obligations. The quality inspection standard shall not be lower than the requirements of the tender documents or national mandatory standards.

3, in the process of engineering construction, must abide by the construction organization design principles promised in the tender documents and related management measures and operating procedures formulated by the owner, etc. , careful construction, to ensure quality, safety in production, environmental protection, completed according to the requirements of the owner.

4, my unit construction personnel, construction equipment and complete sets of equipment must be in place in full and on time in strict accordance with the tender documents, to ensure the smooth progress of the project, if there is any replacement, according to the relevant provisions of the tender documents.

We completely agree to correct the unbalanced quotation and strictly implement the measurement and change procedures.

6. We guarantee to arrange the construction plan reasonably during the construction process and take effective measures to ensure the realization of the total construction period.

7, in the process of construction, must strictly implement the relevant provisions of the project payment,

Ensure that the funds are earmarked and never used for other purposes.

8, in the process of construction, must strictly control the use of special expenses for production safety, never used for other purposes, to ensure safety in production without accidents.

9. We promise to complete the sorting and submission of the completion acceptance data within 3 months after the completion acceptance of all projects.

10. We promise to fully cooperate with the audit, inspection and inspection of the project, unconditionally accept the relevant opinions of the audit and inspection and make timely rectification.

1 1. We promise to fully cooperate with the management unit to repair and improve the defects and legacy projects after the project ends and enters the operation period, and to sort out and file the data.

If our company fails to abide by the above commitments, I am willing to accept any decision made by the tenderer.

Commitment unit: (seal)

Legal Representative: (Signature)

(or authorized agent)

20xx June day