How to 45 bevel the woodworking table saw.

Woodworking is a technical activity with many professional skills and many construction sites. Many carpenters need a table saw during construction, so how can a woodworking table saw have a 45 bevel? What should I pay attention to in woodworking table saw? Let Bian Xiao give you a detailed introduction.

First, how to 45 bevel the woodworking table saw?

If the woodworking table saw needs to be based on the 45 hypotenuse, it can be marked on the board and then based on the mark. You can also use a triangular ruler to make a 45-degree bevel on the table saw, then set the board and start pressing. There is also a table saw with adjustable angle. Just adjust the table saw to 45 degrees. If the table saw can't be adjusted, put a 45-degree bottom plate under it.

Second, what should I pay attention to in woodworking table saws?

1, woodworking table saw, be sure to clean the table saw and the table around, check whether the table saw blade is sharp, whether the saw blades are in the same straight line, and also check whether the rotation direction of the saw blade is correct.

2. Woodworking table saw should not wear gloves, long clothes or long hair, but must wear a mask.

3. When pushing the table saw, carpenters should not directly take things around the saw blade by hand, but should use other auxiliary materials or wood to help them take things.

4. When the carpenter pushes the table saw, he must stick the board close to the fender and can't move it at will.

5. Woodworking should adjust the cutting speed according to the actual thickness and hardness of the plate. Construction must be carried out at a constant speed, not too fast or too hard.

6. After the woodworking table saw is finished, you must remember to turn off the power, and you need to clean the table and the surrounding environment.

The above is a detailed introduction about how to bevel the woodworking table saw at 45 and what should be paid attention to in woodworking table saw, hoping to help friends in need. When the woodworking table saw is constructed, it must be carried out according to the professional construction steps to avoid problems.