Introduction of external wall cleaning for aerial work?

How to clean the external wall of aerial work? What is the basic situation of external wall cleaning for aerial work at this stage? What is the basic profile? Zhong Da Consulting Bianxiao Company will sort out the basic contents of high-altitude external wall operation as follows:

Zhong Da Consulting has sorted out the relevant contents, and the work contents of high-altitude external wall are as follows:

The so-called aerial work refers to the work carried out by people at a height based on a certain position. The national standard GB/T3608-2008 "Classification of Work at Heights" stipulates: "Any work at heights more than 2m (including 2m) from the reference plane of falling height that may fall is called work at heights." According to this regulation, the scope of aerial work in the construction industry is quite extensive. When working in a building, if working on a shelf more than 2m, it belongs to aerial work.

First of all, let's understand the main construction process of external wall cleaning for aerial work:

1, transport aerial work tools to the roof;

2. Choose a fixed point to fasten the working rope and safety rope, put the rope downstairs along the eaves, and pad the joint between the rope and the eaves with carpet (to prevent the eaves from wearing the rope);

3. Aerial personnel should fasten their seat belts, fasten the seat plate on the working rope through the U-clip, put the tools into the working bucket, and then fasten the working bucket on the seat plate and fix it firmly;

4. Tie one end of the self-locking device to the safety rope and the other end to the safety belt;

5, after thorough inspection by the security officer, homework personnel down to the seat plate;

6, high altitude personnel to adjust the working rope, make it taut, after confirm yourself seated, began to clean.

Caution: Pay attention to avoid sharp edges and corners of the rope to prevent the rope from being damaged. Don't get off the rope where there are high-voltage lines. Weather conditions: You can't get off the rope when the wind force is above 5 in thunderstorm weather.

Provisions on safe operation of external wall cleaning for aerial work:

1, every employee should put safety first, enter the work area in strict accordance with the "operating rules", and shall not operate illegally.

2, master the knowledge of safe electricity use and equipment performance, pay attention to insulation protection when working with water, to avoid short circuit danger.

3. Before using electrical equipment, check whether the mechanical equipment is in good condition and whether the power supply has leakage. It is forbidden to run with illness.

4, stop using or moving equipment must turn off the power to prevent accidents.

5. When using chemical cleaner, you should know the performance of the material, pay attention to self-protection and don't damage other items.

6. When working high above the ground, use tools correctly, and don't throw tools down or throw away waste. Set up the "aerial work" sign to prevent injury to others.

7. When working on the ground, a "Be careful of slipping" sign should be set to remind passers-by to avoid slipping and falling.

8. When working outside the window, the center of gravity should be indoors. In order to ensure personal safety, you must fasten your seat belt.

9. Pay attention to your own safety and the safety of others during work, avoid vehicles and avoid accidents.

10, smoking is strictly prohibited at the scene, pay attention to fire prevention, and call the police in time if you find something hidden.

Matters needing attention in cleaning the external wall during aerial work:

1, before going to work, you must carefully check whether the mechanical equipment, appliances, ropes, seat plates and seat belts are damaged, and ensure that the mechanical performance is good and all kinds of appliances are free from abnormal phenomena before going to work.

2. The operating rope and safety rope must be tied separately. Soft objects should be padded along the mouth to prevent the rope from breaking due to wear. The lower end of the rope must touch the ground, and the rope releaser should also fasten the temporary safety rope.

3. Construction personnel should wear work clothes and safety helmets before taking up their posts. Fasten the safety belt first, then fasten the safety lock (on the safety rope), and then fasten the shackle (on the operating rope). At the same time, the buttons on the board should be fastened and fixed.

4, pay-off, construction director and upstairs care personnel to give command and help.

5. When operating, the auxiliary devices should be fastened to prevent falling and hurting people. At the same time, it is forbidden to laugh and play and carry other irrelevant items.

For more information about bid writing and improving the winning rate, click on the bottom customer service for free consultation.