Installation method of stainless steel anti-theft net (manufacturing process of stainless steel anti-theft net)

Installation method of stainless steel anti-theft net: 1. First, the windows on the balcony should be removed, so that the whole window frame on the balcony can be seen in a glance. 2. One person is fixed, and the other person ensures the stability of the stainless steel anti-theft net, which needs to be coordinated by both parties. 3. The master worker needs to fix the fixing screw again with an electric hammer to ensure that it does not slide, and then install the security window in place step by step. 4, cleaning inspection, cleaning the garbage beside the bed, check whether the screws are firm, to ensure that each one is in place.

Precautions for installation

1, choose stainless steel containing a certain amount of nickel and chromium, so as to ensure that stainless steel does not rust. Moreover, the thicker the pipe, the stronger it is, with a thickness difference of 0. 1mm and a compression resistance difference of several hundred kilograms. Generally speaking, the security window strength of 0.6mm to 0.8mm in the national standard is enough. If the first floor is generally added with iron bars, it can be prevented from being opened.

2. In the process of master's door-to-door measurement, it is necessary to clearly open a small door where air conditioning is needed to facilitate installation and maintenance. Generally, one door is enough, not too much, otherwise it will be unreliable. At the same time, the safety window should not be too big or too weak. If you don't like fixing windows, you can push and pull security window indoors, which will broaden your horizons.

3. It is suggested that the installation time of security window should be before the last paint at home is finished. At this time, the installed security window does not need to be cleaned later, and the paint will be damaged when it is installed. After completion, in order to prevent workers from cutting corners, it is necessary to check whether all screws are installed in place.