How to deal with the cable fracture of Habos vibrating screen motor

Move the heat shrinkable tube to the joint, and touch the heat shrinkable tube with an electric soldering iron.

1. First, we peel off the outer insulation glue of the wire with oblique-nosed pliers, and leave the exposed copper wire with an appropriate length according to the thickness of the wire.

2. Then connect the appropriate length of heat shrinkable tube to the single line. Twist the wires that need to be connected together, and pay attention to wiring according to the original color.

3. Weld the connection with soldering iron to avoid load failure caused by poor contact and avoid rust at the connection.

4. Move the heat shrinkable tube to the joint, and contact the heat shrinkable tube with an electric soldering iron so that the heat shrinkable tube tightly wraps the joint.

5. Finally, wrap two layers of insulating tape around the place where the outer rubber is stripped to increase insulation. It should be noted that when dealing with disconnected connectors, we must pay attention to the firm connection. If the wiring is not firm, it is easy to cause wire damage and fire due to poor contact.